Pionite PT12 – Industrial Strength Contact Adhesive
Industrial Strength Contact Adhesive
PT12 is a high performance and versatile industrial strength contact adhesive. Water resistant and temperature resistant to over 200°F, PT12 is designed for bonding a wide range of substrates to include PIONITE decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork and particle board.
Key Features
- Specifically designed for Air Assist Spray - No ODS (Ozone depleting substances) - Non-Chlorinated Solvent - Pionite Quality Bonds - High Temperature Resistance - Fast Tack - Water Resistant
Product Usage
Pionite PT12 is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage on each surface. Allow to dry 2-4 minutes until tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.
Storage
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.
Physical Properties
Appearance: Liquid, clear or red Specific Gravity: .74 + .03 Shear Adhesion: >100psi and >200°F Spray Pattern: Web Spray Flammability: Flammable per ASTM E-681-04 Solvent: Acetone, Cyclohexane Shelf Life: 15 months Freezing: Not damaged by freezing but return to room temp before use.
Packaging
PT12-009C(R) – 9 lbs Disposable Canister PT12-030C(R) – 30 lbs Disposable Canister PT12-140C(R) – 140 lbs Returnable Canister PT12-300C(R) – 300 lbs Returnable Canister All available in Clear (C) or Red (R)
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information
