EverStrong ES20 – Contact Adhesive
ES 20 is designed to be applied to the two surfaces about to be joined. Spray an even coat of adhesive to cover 80% to 100% of the surfaces. Do not wet the surface. Allow to dry 2 to 4 minutes and become tacky. For porous surfaces and crucial areas such as edgebanding, it is recommended to apply a second coat after the first has become tacky. Place the coated surfaces together and apply a uniform pressure for strongest bonding. Full adhesive strength will be reached in 24 hours. Please note that adhesives and substrates should be at 60 ° F or higher for best results. Also, insure that surfaces are dry and free from dirt, grease, oils and any other solvents. Please note that adhesives and substrates should be at 60°F or higher for best results. Also, insure that surfaces are dry and free from dirt, grease, oils and any other solvents.
Key Features
- HAPS Free - Water Resistant - Temperature Resistant to over 200°F - Fast Tack, Strong Bonds - No ODS, Ozone Depleting Substances - No Chlorinated Solvents
Product Usage
EverStrong™ ES20 is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive with at least 80% to 100% coverage of each surface. Allow to dry 2-4 minutes until tacky. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If surfaces are porous, a second coat is recommended after the first has dried and become tacky.
Storage
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.
Physical Properties
Appearance: Liquid, clear or red Specific Gravity: .74 + .03 Shear Adhesion: >100psi and >200°F Spray Tip: ES6501 Spray Pattern: Web Spray Flammability: Flammable per ASTM E-681-04 Solvent: Acetone, Heptane Shelf Life: 15 months Freezing: Not damaged by freezing but return to room temp before use.
Packaging
ES20-013C(R) 13 oz Aerosol Can ES20-009C(R) 9 lbs Disposable Canister ES20-030C(R) 30 lbs Disposable Canister ES20-140C(R) 140 lbs Returnable Canister ES20-300C(R) 300 lbs Returnable Canister
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information
