EverStrong ES110 – Contact Adhesive
EverStrong ES110 is NewStar Adhesives’ multi-purpose industrial contact adhesive specifically designed for air assist spray application. Applied on both surfaces to be adhered, EverStrong ES110 is a high strength, high temperature contact adhesive providing strong permanent bonds for a wide variety of substrates to include decorative laminates and veneers, fiberglass, glass, upholstery, fabrics, foam, auto headliners, cork and particle board. Formulated with no VOCs to comply with CA and OTC states regulations.
Key Features
- Specifically designed for Air Assist Spray - No VOCs - SCAQMD Rule 1168 & OTC Compliant - LEED Compliant - LEED Schools EQ Credit 4.0 - LEED Core & Shell EQ Credit 4.0 - LEED ND & CI EQ Credit 4.1 - LEED EB MR Credit 3.0 - Postformable - High Temperature Resistant -No ODS -No HAPS
Product Usage
For strong permanent bonds, apply ES110 to both surfaces to be bonded. Spray an even coat of adhesive with at least 80% to 100% coverage. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher.
Storage
After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F
Physical Properties
Appearance: Liquid, clear or red Specific Gravity: .90 - .94 g/cc Shear Adhesion: 100psi >200°F Spray Pattern: Pebble Spray Flammability: Flammable per ASTM E-681-04 VOC: 0% by weight Shelf Life: 15 months Freezing: Not damaged by freezing but return to room temp before use.
Packaging
ES110-008C(R) 8# Disposable Canister ES110-027C(R) 27# Disposable Canister ES110-130C(R) 130# Returnable Canister ES110-270C(R) 270# Returnable Canister All available in Clear (C) or Red (R)
Disclaimer of Warranty
NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.
See MSDS Data Sheet for Proper Handling and Safety Information
