Product Usage

NV800 is designed to be applied to both surfaces about to be joined. Spray an even coat of adhesive on both surfaces. Allow to tack. Place the surfaces together and apply pressure evenly across the full bonding surface. For best results: Make sure that the surfaces are dry and free from dirt, grease or oil. Ensure that the adhesives and substrates are at 60°F or higher. If assembly is delayed and the adhesive becomes too dry, apply a light coating again.

Storage

After use, do not close the valve. Leave the gun and hose connected to the canister. Recommended to store canister off the floor if temperatures below 60°F.

Physical Properties

Appearance: Liquid, clear or green
Base: Neoprene
Solvent: Methylene Chloride
Solids %: 23 – 27%
Density: 10.8 lb/gal
Flammability: Nonflammable per ASTM E681-04
Shelf Life: 12 months (unopened)
Freezing: Not damaged by freezing but return to room
temp and stir before use.

Packaging

NV800-005C(G) 5 gal Pail
NV800-055C(G) 55 gal Drum
All available in Clear (C) or Green (G)

Disclaimer of Warranty

NewStar Adhesives Inc. expressly disclaims all warranties either expressed or implied, including but not limited to merchantability, fitness for particular purpose. User is responsible for determining this product is fit for specific purpose and application method and assumes all risk and liability herewith. Manufacturer liability is limited to replacement of product or reimbursement of purchase cost. This provision relates to all sales and cannot be modified.

See MSDS Data Sheet for Proper Handling and Safety Information